| Model Ship Builder :: Forums :: Build Logs :: POB Build Logs |
|
<< Previous thread | Next thread >> |
| Royal Louis 1780 Mamoli kit MV40 code 4006 1:90 | ||
| Go to page 1 2 3 4 5 6 | |
|
Moderators: Winston, aew, bikepunk
|
| Author | Post | ||
| Charles |
| ||
  Registered Member #1923 Joined: Mon Nov 28 2011, 06:07pmPosts: 863 | Foremast construction Lower mast, topmast and topgallant and cable of the shrouds  Laying yards  Here the mainmast and foremast dry mount for now   Next mizzenmast  | ||
| Back to top | | ||
| jacknastyface2 |
| ||
 Registered Member #5239 Joined: Sat Apr 21 2018, 05:29pmPosts: 549 | Hi Charles, well, you have stayed with it despite my comments  A three decker is certainly a lot of work. The rigging looks good to me, compared to the hull---but then I like rigging.Keith. | ||
| Back to top | | ||
| NovaStorm |
| ||
  Registered Member #5618 Joined: Sat Sep 22 2018, 02:33pmPosts: 381 | Im with Keith this is one intensive build. Your work around for the stirrups looks really good. Bet it feels good to be getting some more accomplished  | ||
| Back to top | | ||
| aew |
| ||
aew  Registered Member #1929 Joined: Wed Nov 30 2011, 03:05pmPosts: 2831 | Very nice work Charles. Looking at the plan, it looks as though that mizzen mast is going to have a lateen sail, mizzen course and stunsails. Now there's an unusual combination! | ||
| Back to top | | ||
| Charles |
| ||
| Registered Member #1923 Joined: Mon Nov 28 2011, 06:07pmPosts: 863 | Prepare the parts of the mizzen mat Remake the chocks that are provided by new wooden one  The platforms of combat posed and mast build  Installation of stay cables   Laying yards   The 3 mats posed temporarily are ready to receive the rest of the rope I still have the mast of the bowsprit  Clean up the disaster from my work table and set the RL aside again temporarily to start the Syren and Säo Miguel will work on the 3 ships alternately   | ||
| Back to top | | ||
| Charles |
| ||
| Registered Member #1923 Joined: Mon Nov 28 2011, 06:07pmPosts: 863 | Bowsprit 7 Pieces mainly The construction is simple without major problem    At the place where the mast enters the hull there is an opening which has been corrected with a ring.   At this stage the mast are all complete but having already had this situation I revisit the set of all wiring to put all the hooks and accesory that will be needed later and avoided having to do them in the middle of the ropes.      Here are the mast in place, they are rest 3 sheets 6-7 and 8 to do 6 will be mainly the stay and other wires and mast support cable   | ||
| Back to top | | ||
| Slobodan |
| ||
  Registered Member #4425 Joined: Wed May 07 2014, 03:37pmPosts: 293 | What a beauty Charles. Awesome work on her. | ||
| Back to top | | ||
| jacknastyface2 |
| ||
| Registered Member #5239 Joined: Sat Apr 21 2018, 05:29pmPosts: 549 | Ditto to that Charles. There's an awful lot of work gone into her. Keith. [ Edited Tue Oct 29 2019, 04:12pm ] | ||
| Back to top | | ||
| Charles |
| ||
| Registered Member #1923 Joined: Mon Nov 28 2011, 06:07pmPosts: 863 | I small news update on my build of the R.L. After finishing construction work at one of my son and a figurine painting contract for a friend I and a diorama 1:35 WWI for myself (I have to please myself also and it was a good change of mind) am back hard at work on the R.L. For information for that kit rigging, it is a 5 step that Mamoli give. Step one build the mast and the spar (done) Step two installing the mast with the initial spar (also done) and some advance rigging Step tree, four and five are all the rest 3 sheet drawing very clear and well done Mamoli divide all section wonderfully easy to follow and instruction contrary to build the hull are clear and precise. Each pulley each robe each road the rope have to follow are well explain and with a number. I will give you an example 429 =344+430+431=F13 429 is the main rope on the part number they tell you that it is a 0.4 rope 344 is the Mizzen mast and you start at the top 430 is the pulley at the main mast (5mm one hole) and the emplacement is clearly show 431 is the pulley where the rope is attach (4mm 2 hole) F13 is a small drawing showing how to do it They are a bit more but that give you a small look at how Mamoli did try to keep it clear and relatively easy to do So now I am on drawing 6 step 3 where all the shroud will be done, long and boring work | ||
| Back to top | | ||
| jacknastyface2 |
| ||
| Registered Member #5239 Joined: Sat Apr 21 2018, 05:29pmPosts: 549 | I must have missed some of your latest posts Charles. I particularly was amused at your "third hand" holding your mast upright as you rig the yards. it's not only a hand. It's an arm as well! RL is looking good! Keith. | ||
| Back to top | | ||
| Go to page 1 2 3 4 5 6 | |
Powered by e107 Forum System