Forums / POF Build Logs / Colonial Schooner Hannah 1/4 scale.....by Mario

Forums

Model Ship Builder :: Forums :: Build Logs :: POF Build Logs		<< Previous thread \| Next thread >>
Colonial Schooner Hannah 1/4 scale.....by Mario

Go to page 1 2 3 4 5 6 7 8 9 10
Moderators: Winston, aew, bikepunk

Author

Post

Slobodan

Mon Apr 16 2018, 07:00pm

Registered Member #4425

Joined: Wed May 07 2014, 03:37pm
Posts: 293

Awesome, neat accurate work, I am impressed. Besides, your build log is a true practicum and excellent learning place for modelers.

teleman

Sat Apr 28 2018, 04:11pm

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1270

Thanks Slobodan! Hope to get back to it soon. Recouping from knee surgery. trying to walk without pain. It's a slow process.

teleman

Wed May 02 2018, 04:57am

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1270

Hello All,

trying to recoup from knee surgery and the long recovery ahead. So to take my mind off of the pain I decided to try to get back to my model.
So before I start framing the quarter deck I added the Wales to strengthen the hull frames. I followed hahns advice. The Wales being 3/32nds of an inch thick I ripped two strips of ebony and one of cherry. I laminated all 3 together with regular white glue and clamped them to one of my drinking glass to form the curve at the bow. Bending a solid piece of ebony at 3/32nd's wood of been a bear.
I took a basswood stripe of 3/32 and clamped it to the hull after I transferred the locations measurements from the plans. The basswood was for practice and once in place I took some tape to mark the full strake. Once I was done I knew exactly where I was going to place the Wales. I added two strakes of boxwood above the Wales also.
I did this to help me verify that i placed the deck clamp in the correct loactions. because once the deck beams and ledges and the 1/16th thick deck planking was in place, my third boxwood strake wood line up perfectly. I did this because the third strake is where the scubbers reside.
I did a lot of measuring and re-measuring and transferring those measurements and re-checking again and again. Remember the jig I used from the kit had to be removed to do all this. Plus the rest of the practicum was with the hahn upside down jig. I doing this in no jig at all from here out. PLUS I AM FIRST TIMER ON POF WITH THIS MUCH DETAIL.
I did not mind because it help me from concentrating too my on my knee. I was really getting into it. I also cut out the stantions. I had to completely cut out the howes timbers and the catheads. The laser cut frames from the kit were too short. So I added a piece and pegged it to the existing frame.
My apologies with not having enough pictures to show all this, because of my hurting leg. Not in the picture taking mood. Advice blow up your knee like I did and it won't hurt so damn much! HAHAAHA!!!

As I continue on I sure my plan comes together and my measuring is spot on or so close that I'm happy with it.

aew

Wed May 02 2018, 08:23am

aew

Registered Member #1929

Joined: Wed Nov 30 2011, 03:05pm
Posts: 2824

Nice work Mario, and nicely documented.

teleman

Wed May 02 2018, 04:55pm

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1270

Thanks Arthur. I try to give as much info of my building process as I can. So if others have questions I had hoped with my detailed explanations I could answer some of their questions. When I read some builds that have very good details it helps me a lot. There are builds that really great work but not much explanation how did it and I wish they had.

The practicum is very good. But I treat any practicum like the "PIRATES CODE". It's more like guide lines. I go by what it says and at times I go with what feels right for me to get it done. The big difficulty with this kit is the jig. The jig is nice, but once you get to a certain point it has to go. Hahn's jig the model is left in during the planking. I had to remove it because i could not put the Wales on. Most of the hull and the deck will be planked.

Thanks for stopping by

Mario

[ Edited Wed May 02 2018, 04:57pm ]

teleman

Sat May 05 2018, 06:58pm

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1270

Last of the deck framing is done, with the completion of the last ledging and the breast hook combination at the bow.

Now for the poop deck framing. For the stantions I first make small cuts into each frame with my rotary tool. it makes it easier then starting with an exacto knife. the rest of the cut is done with an exacto saw blade. Then finished up with manicure files.

Now I was going to continue on with the Poop Deck. But Mark Taylor from MSW presented a question to me. Did the Hannah have a Orlop deck? I offend wondered about this. Did Hahn omit this from his model for the simple reason he was construction a model simplified for the first time POF model builder? I don't know. I hope Dave Stevens takes a look here on my build log and maybe answer my question here. Hahns book does stated the Hannah was basicly build from examples from the Halifax back in 1775 I think. I still have access to the hull interior, so I am tempted to do this if I can get clarification on the interior of the hull.
I also wondered about hanging knees and where would they be located at and the lodging knees. The ships smoke stack....there has to be a lower deck where the stove is located. Am I correct about that???

IF ANYONE CAN HELP ME WITH THESE QUESTIONS PLEASE CHIME IN. BECAUSE THAT WOULD BE A LOT MORE FUN WITH THIS MODEL!!!

I added a picture of the Halifax to help with these questions.

I have the Poop Deck ready to go. But going to wait a little bit to see if I get any answers to my questions .

teleman

Sat May 05 2018, 06:59pm

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1270

I picture of the Halifax that brings up my questions.

teleman

Sat May 05 2018, 07:26pm

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1270

I was planning on stopping on the Hannah a bit after I completed the Poop Deck framing. I wanted to start another scratch build. I have a buddy who wanted to build a model boat so i gave him one of my kits. He is a good model builder, but never made a boat. I gave him the kit under the condition I got the box , book, and plans back unscathed. So he made copies and wrote all over his and cut out portions out to do his build. He did a great job. So I am going to start making the build board will I hopefully get my questions answered on the Hannah. here the book.