Forums / POB Build Logs / Constructo Victorian Steam Launch 1/26 by teleman(bashed)...to the "WINDERMERE"...completed

Forums

Model Ship Builder :: Forums :: Build Logs :: POB Build Logs		<< Previous thread \| Next thread >>
Constructo Victorian Steam Launch 1/26 by teleman(bashed)...to the "WINDERMERE"...completed

Go to page 1 2 3 4 5 6 7 8
Moderators: Winston, aew, bikepunk

Author

Post

teleman

Wed May 29 2013, 01:45am

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1254

Well I have the final photos in the complete section, but you know what I never added the build log here at MSB.

So I got a little free time here so I thought i would add this build for the fun. Their famous for cruising the river Thames.

I had a whole lot of fun bashing this little cruizer

[ Edited Thu Jul 04 2013, 12:47am ]

teleman

Wed May 29 2013, 01:52am

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1254

teleman

Wed May 29 2013, 01:55am

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1254

\:D/

teleman

Wed May 29 2013, 01:59am

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1254

quetions and remarks are welcomed.................

and now time for a

TBlack

Wed May 29 2013, 02:17am

Registered Member #1524

Joined: Sun Mar 13 2011, 07:51pm
Posts: 133

Mario,
Looks like fun. But I imagine difficult to get those 2mm mahogany planks to follow some of those sweet lines. I didn't quite understand about the filler blocks not being thick enough. Aren't they governed by the frames/bulkheads? And how did you correct the problem?
Tom

teleman

Wed May 29 2013, 02:58am

Registered Member #1925

Joined: Tue Nov 29 2011, 05:32am
Posts: 1254

Hi Tom

Well my opinion only but Constructo material is very poor. The filler blocks never reach the tops of the frames so i had to add more material and then sand it flush to the edges of the frames....

I still have the plans and if i were to build another one it will be from my home stock which is much better in quality...